ceramic tube

英 [səˈræmɪk tjuːb] 美 [səˈræmɪk tuːb]

陶瓷管

化学



双语例句

  1. This paper briefly introduced the requirements of ceramic tube for HID lamps;
    简要介绍对高强度放电(HID)灯用陶瓷管的要求;
  2. Proprietary ceramic tube sockets with silver contacts.
    专有的陶瓷管插座与银接触。
  3. Preparation of Hydroxyapatite Ceramic Tube and Controlling on Its Configuration
    羟基磷灰石陶瓷管的成型与形貌控制
  4. Research on Ceramic Tube for Electric Water Heater in Heating Up Immediately
    即热式电热水器陶瓷管的研制
  5. The new HID lamps include the high wattage metal halide lamp 、 low wattage ceramic tube metal halide lamp, high pressure Sodium lamp, super high pressure mercury lamp, electrodeless metal halide lamp and so on.
    这些新型灯包括有大功率金卤灯、低功率陶瓷管金卤灯、高压钠灯、超高压汞灯和无电极金卤灯等。
  6. Quality control of high-aluminum oxide electric vacuum ceramic tube
    电真空高铝陶瓷管产品质量控制
  7. Burning Gas Forging Heating Furnace of Ceramic Tube Type
    陶瓷管型燃气锻造加热炉
  8. The ceramic tube type burning gas heating furnace is new furnace which combines the burning room and heating room, it has callback device of residual heat, smoke and gas, and its saving energy effect is remarkable, heat efficiency more than 40%.
    陶瓷管型燃气加热炉将加热室和燃烧室合二而一,并有余热烟气回收装置,节能效果显著,热效率高达40%以上。同时可以做到清洁作业,大大改善工作环境和工人的劳动强度。
  9. The development on the firing furnace with ceramic tube radiators
    陶瓷辐射管烧成炉的研制
  10. Using Pd Ag/ γ Al 2O 3/ ceramic tube composite inorganic membrane loaded with Cu ZnO ZrO 2/ SiO 2 fixed bed catalyst to form reaction separation coupled membrane reactor, the reactivity of methanol dehydrogenation to methyl formate is studied.
    采用PdAg/γAl2O3/陶瓷管复合无机膜填充CuZnOZrO2/SiO2固定床催化剂,构成反应分离耦联膜反应器,考察对甲醇脱氢制甲酸甲酯反应性能的影响。
  11. For the flexible stress transfer system, we present an application for patent which is a CIP device for molding a ceramic tube with blind hole.
    针对柔性应力传递系统,申请了一种带盲孔的陶瓷管冷等静压成型装置的专利(已受理)。
  12. At present, the nonoptical method is often used, in which a piezoelectric ceramic tube is used to control the distance between tip and sample.
    目前普遍采用非光学检测法,基本上是采用压电陶瓷管控制探针和样品的距离。
  13. Using a porous ceramic tube, which has a pore size distribution for microfiltration, as matrix material of a membrane reactor, γ Al 2O 3 membrane with a pore size distribution for ultrafiltration is synthesized on the internal surface of the ceramic tube by Sol Gel techniques.
    采用具有微滤级孔径分布的多孔陶瓷管作为膜反应器的基质材料,在其内侧表面上用Sol-Gel技术合成具有超滤级孔径分布的的γ-Al2O3过渡层膜;
  14. In our work, an ultrafiltration γ Al 2O 3 membrane has been prepared on the basis of microfiltration grade ceramic tube by the Sol Gel method using aluminium isopropylate ( C 9H 21 AlO 3) as starting material.
    本研究以异丙醇铝为原料,采用Sol-Gel法在微滤级的基质陶瓷管上制备了无裂纹的超滤级γ-Al2O3膜。
  15. For the purpose of manufacturing Al 2O 3 mullite multiphase ceramic tube for thermoelectric pyrometer, five specimens which have different Al 2O 3 content have been made on the base of in-situ reaction.
    为制备工业用高温热电偶瓷管,本实验依据原位反应的原理,配制了不同Al2O3含量的试样,主要研究了以Al2O3作为第二相增韧增强剂的mulite基复相陶瓷材料的烧结行为。
  16. Then the DM formation process turns to fit to cake filtration model, during which, particles deposit on the inner wall of ceramic tube, and penetrating flux decreases slowly until it reaches steady state.
    之后,膜的形成过程符合滤饼过滤模型,这一阶段颗粒主要在载体膜管内壁面沉积,渗透液通量缓慢下降直至基本稳定。
  17. Determination of Osmotic Velocity of Liquid Medicine in Porous Ceramic Tube
    多孔陶瓷管对药液渗透速度的测定
  18. The Preparation of Hydroxyapatite Ceramic Tube
    羟基磷灰石陶瓷管的制备
  19. This paper presents a electric heating technology with electric chemistry methods by which the oxide film is deposited on the surface of the ceramic tube.
    提出在陶瓷管基体表面用电化学方法沉积氧化物薄膜以实现电加热技术。
  20. The development of a CW CO_2 tunable laser using grating for wave selection and piezoelectric ceramic tube for cavity length tuning is re-ported.
    我们研制了一台用光栅选支、压电驱动改变腔长的连续CO2调频激光器。
  21. Preparation of Pd/ γ Al 2O 3/ ceramic tube composit membrane reactor and its permeability
    Pd/γ-Al2O3/陶瓷管复合膜反应器的制备及其渗透性能
  22. Study on Preparation and Hydrogen Separation of Ceramic Tube Supported γ-Alumina-Silica Inorganic Composite Membrane
    陶瓷载体-γ氧化铝-二氧化硅无机复合膜的制备及其分离氢气的研究
  23. The above four slurries were also respectively favorable combination with Al2O3 ceramic tube, and the range of firing temperature of ceramic tube after dipping slurry varied from 1 000 C to 1400 C.
    前述的四种料浆也能良好地与Al2O3陶瓷管结合,涂覆料浆的Al2O3陶瓷管烧成温度为1000℃~1400℃。
  24. Regard: The hot injection molding technology have great potentialities to produce the aluminum oxide electricvacuum ceramic tube, which will be used in higher or low-voltage circuit.
    重点对热压铸成型工艺控制进行了论述,热压铸成型工艺用于中、低压领域的氧化铝陶瓷真空管的生产,具有潜力可挖。
  25. Through the renovation of membrane surface and control of key preparation technology, high-effective composite Pd membrane is formed by Al 2O 3 porous ceramic tube as the support.
    以氧化铝多孔陶瓷管做为支撑体,通过对其表面进行有效修饰和控制制备的技术关键,可以制备高效复合金属钯膜。
  26. Moreover, transparent alumina ceramic tube for ceramics metal halide lamps and dome for infrared windows were prepared using different forming process with the modified alumina powders.
    此外,尝试了采用改性处理的高纯度氧化铝粉体并结合不同的成型工艺来制备了陶瓷金卤灯用透明氧化铝管部件及透明氧化铝红外头罩材料。
  27. Herein, the ZnO hierarchical structures were synthesized by the simple solution in-situ growth using fiber, copper network and alumina ceramic tube as template, respectively.
    本文用简单的溶液原位生长法以纤维、铜网、氧化铝陶瓷管为模板合成ZnO纳米棒构成的分级结构。
  28. Considering the integrated requirements of low dielectric constant, low power consumption and low heat expansion coefficient, the special microwave ceramic tube was selected with different thermal insulation material.
    选用低介电常数、低功率损耗、低热膨胀系数的微波专用陶瓷管,并采取多种保温材料保温。